0.01-60-100A交流量程

帶背光的ACA微型鉗

便于狹窄處使用的鉗型細磁芯

夾緊狀態確認標記

數據鎖定

自動關機(大約30分鐘)

采樣率: 數值 2次/秒

Designed as a small, easy-to-carry device that can be put in your pocket !
The full-auto range has been adopted to eliminate the need of selecting a range !

Slim jaws with width of approximay 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires.

■ Back light has been adopted to use in the dark place.

■ A leverbuttons are laid out in positions where they can be handled with a single hand.

■ The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurementto check the measured value later.

■ The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter.

■ Its rear has been curved so that the clamp meter can be held comfortably in the palm.