熱變形維卡軟化點溫度測定儀(6路)

型號：RBWK-300C

熱變形維卡軟化點溫度測定儀適用范圍：

主要用于塑料、硬橡膠、尼龍、電絕緣材料、長纖維增強復合材料、高強度熱固性層壓材料等非金屬材料的熱變形溫度及維卡軟化點溫度的測定。操作方便、控制精確，是一種智能化*的測試儀器，廣泛應用于大專院校，科研單位及產品質量監督檢驗單位。

==========================================================================

熱變形維卡軟化點溫度測定儀功能：

熱變形維卡軟化點溫度測定儀采用具有Windows 98、Windows2000或WindowsXP中文操作界面，實時監控試驗溫度、實時繪制溫度及變形量的曲線，打印試驗報告，實現歷史存盤，鼠標點擊形變和溫度曲線的任何一處，界面會自動顯示該處的變形量及溫度值。選用高精度位移傳感器測變形。

=========================================================================

熱變形維卡軟化點溫度測定儀執行標準：

符合GB/T 1633-2000、GB/T 8802、

GB/T 1634-2004、ISO 2507、ISO 75、ISO 306、     

ASTMD 1525、ASTMD 648等標準要求。

=======================================

熱變形維卡軟化點溫度測定儀技術參數：

1）控溫范圍：室溫～300℃

2）zui大溫度誤差：±0.5℃      

3）升溫速度：50℃/h、120℃/h

4）溫度測量點：1個

5）試驗架數：6個

6）變形測量范圍：0～10mm    

7）zui大變形誤差：±0.005mm

8）試樣支承跨距：64mm(平放優選)、100mm（側立）

9）具有上限溫度保護功能；

10）控制方式采用單片機和PC機分布式控制系統；    

12）具有試樣架自動升降系統；

13）使用介質：甲基硅油或變壓器油；

14）冷卻方式：150℃以上自然冷卻，150℃以下水冷卻或自然冷卻。

13）外形尺寸：920X400X1300mm

================================================

熱變形維卡軟化點溫度測定儀配置：

 1）主機                        一臺                       

2）試樣架                      六個

3）熱變形壓頭                  六個

4）維卡壓針                    六個

5）高精度位移傳感器            六支

6）品牌臺式計算機              一臺

7）彩色噴墨打印機              一臺

8）中文版下操作系統的試驗軟件  一套

9）電源線                      一根

10）信號線                     一根

11）砝碼                       一套

英文資料如下：

The thermal deformation of VEKA softening point temperature testing instrument (6 Road)

Model: RBWK-300C

The thermal deformation of VEKA tester applies softening point temperature range:

Mainly used in plastic, rubber, nylon, electrical insulating materials, determination of softening point temperature high strength composite material, laminated thermosetting materials and other non-metallic materials thermal deformation temperature and VEKA long fiber reinforced. Convenient operation, precise control, is a test equipment of inligent high, widely used in universities, scientific research units and product quality supervision and inspection unit.

===========================

The thermal deformation of VEKA tester functions softening point temperature:

The thermal deformation of VEKA tester with Windows 98, Windows2000 or WindowsXP Chinese interface softening temperature, temperature and deformation of real-time rendering, real-time monitoring test temperature curve, print test reports, achieve historical disk, the mouse to click on the deformation and temperature curve at any point, the interface will automatically display the deformation and the temperature of the value. Selection of high precision displacement sensor to measure the deformation.

=========================================================================

=========================================================================

The thermal deformation of VEKA tester standard softening point temperature:

According to GB/T 1633-2000, GB/T 8802,

GB/T 1634-2004, ISO 2507, ISO 75, ISO 306,

ASTMD 1525, ASTMD 648 standards.

=================================

The thermal deformation of VEKA technical parameters of softening point temperature measuring instrument:

1): room temperature to 300 ℃ temperature range

2) the maximum temperature error: ± 0.5 ℃

3) the heating rate: 50 ℃ /h, 120 ℃ /h

4) temperature measurement points: 1

5) test frame number: 6

6) deformation measuring range: 0 ~ 10mm

7) the maximum deformation error: ± 0.005mm

8) sample supporting span: 64mm (flat preferred), 100mm (side)

9) has an upper limit temperature protection function;

10) control by SCM and PC machine distributed control system;

12) with a sample rack automatic lifting system;

13) use of media: methyl silicone oil or transformer oil;

14) cooling: 150 ℃ of 150 ℃ natural cooling, water cooling or cooling.

13) size: 920X400X1300mm

================================================

================================================

The thermal deformation of VEKA configuration softening point temperature measuring instrument:

1) a host

2) sample frame six

3) thermal deformation pressure head six

4) VEKA pin six

5) the high precision displacement sensor six

6) brand desktop computer

7) color inkjet printer a

8) Chinese version under the operating system of a set of test software

9) a power line

10) signal line

11) the weight of a