一、概述Outline
QJ（D/S）V、QJ（D/S）VY型精小型氣動V型調節球閥由氣動活塞式執行機構和帶V型切口的部分球面形的整體式球閥組成。屬旋轉類調節球閥。
氣動V型調節球閥以壓縮空氣為動力源。接受控制系統來的4—20mA DC（0—10mA DC）訊號，通過電氣轉換或電—氣閥門定位器將電信號轉化成閥門動作所需要的氣信號，對調節球閥進行調節。
氣動V型調節球閥，其流道通暢，流量系數大，可調范圍大，密封性能好。其帶V型切口的閥芯，對閥座具有良好的剪切作用，使該產品適用于石油化工、造紙、污水處理及冶金等行業，對含有纖維和顆粒的懸濁液介質進行流量控制，特別適用于制漿、造紙生產過程中的紙漿、白水、黑液、白液等懸浮顆粒流體及濃濁狀流體介質的自動調節。
氣動活塞式執行結構可分為單作用和雙作用兩種。雙作用使用在失電或失氣時，閥門處于失電或失氣時，閥門處于原始極限位置（全開或全閉），以確保生產過程處于安全位置。
QJ （D / S） V, QJ （D / S） VY fine small pneumatic V-type ball valve by the pneumatic piston actuator and with a V-notch portion of the overall spherical shape of ball valve components. Is a rotating type ball valve.
V-ball valve pneumatic compressed air as power source. Accept the control system to the 4-20mA DC （0-10mA DC） signal through the electrical conversion or electric - gas valve positioner to the valve movement into electrical signals needed gas signal, the ball valve to adjust.
Pneumatic V-ball valve, the flow smooth, flow coefficient, adjustable range, good sealing performance. The V-shaped incision with the spool of the valve seat has a good shearing, so that the product is suitable for petrochemical, paper, sewage treatment and metallurgical industries, containing fibers and particles in suspension media flow control , especially for pulp and paper production process of paper pulp, white water, black liquor, white liquor and other suspended particles in the fluid and the fluid medium Nongzhuo like the automatic adjustment.
Pneumatic piston implementation structure can be divided into single and double acting two. Dual role in the loss of power or loss of use of gas when the valve is out of power or loss of gas when the valve is in the original extreme position （open or closed） to ensure that the production process in a secure location.
二、主要技術參數和性能指標The main technical parameters and performance indicators
| 型 式 type | 直通式鑄造球閥Through casting ball valve | ||||||||||||||
| 公稱通徑mm | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| 公稱直徑mm | 20 | 26 | 33 | 40 | 53 | 66 | 86 | 104 | 128 | 170 | 212 | 255 | 300 | 340 | |
| 額定流量系數Kv | 25 | 36 | 63 | 100 | 160 | 250 | 400 | 600 | 950 | 1540 | 2500 | 3900 | 6150 | 980 | |
| 公稱壓力MPa | 1.6、6.4 | ||||||||||||||
| 氣源壓力Mpa | 0.4~0.6 | ||||||||||||||
| 連接形式 Connection form | 對夾式（管道法蘭標準GB/T 9119-2000）、法蘭式（JB/T82） Wafer （pipe flange standard GB / T 9119-2000）, flange （JB/T82） | ||||||||||||||
| 介質溫度℃ Temperature | 軟密封-40℃~+180℃（KV V）;硬密封-40℃~+450℃（KV Vy） Soft sealing -40 ℃ ~ +180 ℃ （KV V）; seal -40 ℃ ~ +450 ℃ （KV Vy） | ||||||||||||||
| 額定行程 Rated travel | 90℃±3； | ||||||||||||||
| 固有流量特性 Inherent flow characteristic | 近似百分比Approximate percentage | ||||||||||||||
| 閥體材料 Body Material | 鑄鋼、鑄不銹鋼 Steel, cast stainless steel | ||||||||||||||
| 閥座材料Seat Material | 聚四氟乙烯、不銹鋼、司鈦萊硬合金 Teflon, stainless steel, titanium Levin hard alloy Division | ||||||||||||||
| 電氣閥門定位器/電氣轉換器 Electropneumatic positioner / electrical converter | 輸入信號Input signal | 4~20Ma DC或0~10Ma DC | |||||||||||||
| 防爆等級Explosion levels | 普通型、防爆型：隔爆型（EXdIIBT4）、本安型 Common type, explosion-proof: Flameproof （EXdIIBT4）, intrinsically safe | ||||||||||||||
| 執行機構借口Actuator excuse | 1/8”G（GTX52、63、75、92） NAMUR1/4”G（GTX110、118、127、160、210、254、255） | ||||||||||||||
| 可調比Adjustable ratio | 300：1 | ||||||||||||||
注：DN25—250采用對夾式、DN300—400采用法蘭式
Note: DN25-250 used for clip-on, DN300-400 using flange
三、性能指標Performance indicators
| 項 目 Item | 指標值Index value | 項目Item | 指標值Index value |
| 基本誤差% Basic error% | ±2.0、±1.5 | 始終點偏差% Always point deviation% | ±2.5 |
| 回 差% Differential% | 2.0、1.5 | 允許泄漏量 1/hAllowable leakage 1 / h | 軟密封：IEC534-4，VI級 Soft sealing: IEC534-4, VI ??level |
| 死 區% Dead% | 0.8、0.6 |
注：帶定位器的指標值
Note: The index value with a locator
四、允許壓差Permissible differential pressure
1、雙作用執行機構（PN1. 6 4. 0閥體）Double-acting actuators （PN1. 6 4. 0 body）
公稱通徑mm | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||
| 執行結構 Executive Structure | 允許壓差Permissible differential pressure | |||||||||||||
| AGT | 軟密封 Soft sealing | 關閉 Close | 3.21 | 2.41 | 1.31 |
|
|
|
|
|
|
|
|
|
| △P | 0.74 | 0.52 | 0.31 |
|
|
|
|
|
|
|
|
| ||
| 硬密封 | 關閉 Close | 4.99 | 4.10 | 3.13 |
|
|
|
|
|
|
|
|
| |
| △P | 0.74 | 0.52 | 0.31 |
|
|
|
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close | 3.97 | 3.77 | 3.37 | 2.15 | 1.29 | 0.70 |
|
|
|
|
|
|
| △P | 1.72 | 1.27 | 0.83 | 0.53 | 0.30 | 0.16 |
|
|
|
|
|
| ||
| 硬密封 | 關閉 Close | 4.99 | 4.99 | 4.99 | 4.99 | 2.80 | 1.33 |
|
|
|
|
|
| |
| △P | 1.72 | 0.83 | 0.53 | 0.30 | 0.16 |
|
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
| 3.37 | 2.15 | 1.29 | 1.25 |
|
|
|
|
|
|
| △P |
|
| 1.33 | 0.87 | 0.49 | 0.28 |
|
|
|
|
|
| ||
| 硬密封 | 關閉 Close |
|
| 4.99 | 4.99 | 2.80 | 2.62 |
|
|
|
|
|
| |
| △P |
|
| 1.33 | 0.87 | 0.49 | 0.28 |
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關 閉 Close |
|
|
|
|
| 2.05 | 0.70 |
|
|
|
|
|
| △P |
|
|
|
|
| 0.48 | 0.16 |
|
|
|
|
| ||
| 硬密封
| 關閉 Close |
|
|
|
|
| 4.52 | 1.56 |
|
|
|
|
| |
| △P |
|
|
|
|
| 0.48 | 0.16 |
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
| 2.05 | 2.03 | 1.15 | 0.68 |
|
|
|
| △P |
|
|
|
|
| 0.82 | 0.45 | 0.25 | 0.19 |
|
|
| ||
| 硬密封 | 關閉 Close |
|
|
|
|
| 4.52 | 4.50 | 2.31 | 1.43 |
|
|
| |
| △P |
|
|
|
|
| 0.82 | 0.45 | 0.25 | 0.19 |
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
|
| 2.03 | 2.54 | 1.54 | 0.68 |
|
|
| △P |
|
|
|
|
|
| 0.81 | 0.52 | 0.40 | 0.13 |
|
| ||
| 硬密封 | 關閉 Close |
|
|
|
|
|
| 4.50 | 4.97 | 3.23 | 1.13 |
|
| |
| △P |
|
|
|
|
|
| 0.81 | 0.52 | 0.40 | 0.13 |
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
|
|
| 2.54 | 1.54 | 1.52 | 0.84 | 0.62 |
| △P |
|
|
|
|
|
|
| 0.91 | 0.69 | 0.29 | 0.15 | 0.11 | ||
| 硬密封 | 關閉 Close |
|
|
|
|
|
|
| 4.97 | 3.23 | 2.68 | 1.47 | 1.11 | |
| △P |
|
|
|
|
|
|
| 0.91 | 0.69 | 0.29 | 0.15 | 0.11 | ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
|
|
|
|
| 2.11 | 1.82 | 1.31 |
| △P |
|
|
|
|
|
|
|
|
| 0.70 | 0.38 | 0.28 | ||
| 硬密封 | 關閉 Close |
|
|
|
|
|
|
|
|
| 3.72 | 3.25 | 2.52 | |
| △P |
|
|
|
|
|
|
|
|
| 0.70 | 0.38 | 0.28 |
注：1、表中數據為標準配置，可配用不同執行機構或改變填料材質改變允許壓差；2、氣源壓力為0.4MPa（G）下
2、單作用執行結構（PN1. 6 4. 0 閥體）
| 公稱通徑mm | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||
| 執行結構 | 允許壓差 | |||||||||||||
| AGT | 軟密封 Soft sealing | 關閉 Close | 1.47 | 0.98 | 0.49 |
|
|
|
|
|
|
|
|
|
| △P | 0.34 | 0.23 | 0.12 |
|
|
|
|
|
|
|
|
| ||
| 硬密封 Seal | 關閉 Close | 4.29 | 2.60 | 0.90 |
|
|
|
|
|
|
|
|
| |
| △P | 0.34 | 0.23 | 0.12 |
|
|
|
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close
| 2.58 | 1.79 | 1.01 | 0.58 | 0.35 |
|
|
|
|
|
|
|
| △P | 0.60 | 0.53 | 0.45 | 0.16 | 0.08 |
|
|
|
|
|
|
| ||
| 硬密封 Seal | 關閉 Close | 4.99 | 3.66 | 2.33 | 1.13 | 0.35 |
|
|
|
|
|
|
| |
| △P | 0.60 | 0.42 | 0.24 | 0.16 | 0.08 |
|
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close | 3.97 | 3.00 | 2.03 | 1.27 | 0.76 | 0.33 |
|
|
|
|
|
|
| △P | 1.10 | 0.79 | 0.49 | 0.31 | 0.17 | 0.08 |
|
|
|
|
|
| ||
| 硬密封 Seal | 關閉 Close | 4.99 | 4.99 | 4.99 | 2.86 | 1.41 | 0.45 |
|
|
|
|
|
| |
| △P | 1.10 | 0.49 | 0.31 | 0.17 | 0.08 |
|
|
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
| 2.15 | 1.29 | 1.11 | 0.23 |
|
|
|
|
|
| △P |
|
|
| 0.79 | 0.44 | 0.25 | 0.06 |
|
|
|
|
| ||
| 硬密封 Seal | 關閉 Close |
|
| 4.99 | 4.99 | 2.80 | 2.31 | 0.51 |
|
|
|
|
| |
| △P |
|
| 1.21 | 0.79 | 0.44 | 0.25 | 0.06 |
|
|
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
| 2.05 | 0.88 | 0.43 | 0.21 |
|
|
|
| △P |
|
|
|
|
| 0.56 | 0.20 | 0.10 | 0.08 |
|
|
| ||
| 硬密封 Seal | 關閉 Close |
|
|
|
|
| 4.52 | 1.98 | 0.86 | 0.45 |
|
|
| |
| △P |
|
|
|
|
| 0.56 | 0.20 | 0.10 | 0.08 |
|
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
|
| 2.03 | 1.19 | 0.70 | 0.27 |
|
|
| △P |
|
|
|
|
|
| 0.46 | 0.25 | 0.19 | 0.05 |
|
| ||
| 硬密封 Seal | 關閉 Close |
|
|
|
|
|
| 4.50 | 2.35 | 1.45 | 0.39 |
|
| |
| △P |
|
|
|
|
|
| 0.46 | 0.25 | 0.19 | 0.05 |
|
| ||
| AGT | 軟密封 Soft sealing | 關閉 Close |
|
|
|
|
|
|
| 2.54 | 0.54 | 0.98 | 0.52 | 0.52 |
| △P |
|
|
|
|
|
|
| 0.71 | 0.54 | 0.19 | 0.09 | 0.09 | ||
| 硬密封 Seal | 關閉 Close |
|
|
|
|
|
|
| 4.97 | 3.23 | 1.68 | 0.88 | 0.88 | |
| △P |
|
|
|
|
|
|
| 0.71 | 0.54 | 0.19 | 0.09 | 0.09 |
注：1、表中數據為標準配置，可配用不同執行機構或改變填料材質改變允許壓差；2、氣源壓力為0.4MPa（G）下
Note: 1, data in the table for the standard configuration, the actuator can be equipped with different filler material change or change to allow pressure; 2, the supply pressure of 0.4MPa （G） under
五、執行機構轉扭及動作時間Twist and turn actuators operating time
| 執行機構 | 63*90 | 75*90 | 83*90 | 92*90 | 110*90 | 118*90 | 127*90 | 160*90 | 210*90 | 254*90 | 255*90 | |
| 扭矩 | 400KPa | 23.2 | 40.0 | 56.0 | 77.6 | 112.8 | 168.0 | 220.0 | 440.0 | 948.0 | 1740.0 | 2172.0 |
| 500KPa | 29.0 | 50.0 | 70.0 | 97.0 | 141.0 | 210.0 | 275.0 | 550.0 | 1185.0 | 2715.0 | 2715.0 | |
| 動作時間（S） | 0.241 | 0.333 | 0.429 | 0.444 | 0.461 | 0.60 | 0.857 | 1.62 | 3.33 | 6.00 | 7.50 | |
注：雙作用執行機構在75%負載情況下的動作時間
Note: The double-acting actuators under load at 75% operating time
六、可配附件Available Accessories
電-氣閥門定位器、電-氣轉換器、空氣過濾減壓器、手輪機構等。
Electric - gas valve positioners, electric - gas converter, air filter regulator, hand wheel institutions.
七、外形尺寸及重量Dimensions and weight
QJSV-16型氣動V型調節球閥QJSV-16 Pneumatic V-ball valve
| 公稱通徑 DN | 對夾 Wafer | 法蘭 Flange | H1 | H2 | L1 | D1 | 重量Kg |
| L | L | ||||||
| 25 | 50 |
| 177 | 57 | 155 | 85 | 16 |
| 40 | 60 |
| 183 | 63 | 110 | 17 | |
| 50 | 75 | 108 | 203 | 92 | 203 | 125 | 19 |
| 65 | 85 | 145 | 210 | 100 | 145 | 21 | |
| 80 | 100 | 165 | 225 | 108 | 160 | 23 | |
| 100 | 115 | 195 | 233 | 117 | 290 | 180 | 27 |
| 125 | 135 | 210 | 280 | 140 | 210 | 38 | |
| 150 | 160 | 229 | 303 | 177 | 240 | 47 | |
| 200 | 200 | 292 | 335 | 200 | 368 | 295 | 75 |
| 250 | 245 | 330 | 379 | 252 | 355 | 107 | |
| 300 |
| 356 | 410 | 270 | 410 | 180 | |
| 350 |
| 400 | 430 | 320 | 450 | 470 | 260 |
| 400 |
| 420 | 480 | 390 | 525 | 360 |
化工儀器網