RLF01A-SAB-AA00，英國NORGREN氣缸型號
VDE注冊。 0110（除微動觸點間隙）。
*因?yàn)樗鼤?huì)腐爛金鍍不是必需的。zui大。燙發。浪涌
電流（appr.30毫秒）ACmake=zui大。 1。
*需要鍍（不會衰減）。
†臨界電壓的下限值可以保證足夠的接觸安全。
低電壓有利的條件下允許的。
星火直流電壓淬火（建議）
1，在平行于感性負載二極管D。
These products are intended for use in industrial systems only. Do not
use these products where pressures and temperatures can exceed
those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications
not within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power
RLF01A-SAB-AA00，英國NORGREN氣缸型號
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in
fluid power systems and to provide adequate safeguards to prevent
personal injury or damage to equipment in the event of such a failure.
System designers must provide a warning to end users in the
system instruction manual if protection against a failure mode
cannot be adequay provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products where applicable.
遵守正確的極性（正極到負極）的。
標注規范淬火二極管：
額定電壓二極管：UD≥1.4×紫外線
選擇個快速開關二極管（恢復時間trr<[200] MS）的。
額定電流二極管：IR≥I負荷
2，并聯RC回路并聯向負載開關觸點。
適用于直流ABD交流電壓。
R輸入Ω≈0.2×RLOADΩ中
下在μF≈I負荷在
性轉換的參考編號：30/min。參考溫度：+30°C
星火與二極管DC和感性負載淬火：
爬電距離和空氣路徑根據對應到B組的緣