目錄:上海蒸鑫電子科技有限公司>>TT電子(TT Electronics)>>對射式光電開關>> OPB960-990對射式光電開關(光電子)
應用領域 | 醫療衛生,電子 |
---|
OPB960,OPB970,OPB980,OPB990 Series
The OPB960/ 970/ 980/ 990 series of non-contact Photologic® slotted optical switches provides flexibility in meeting application specific requirements for the design engineer.
Building from a standard housing with a 0.125" (3.18mm) wide slot, the user can specify output logic state, output driver circuit, aperture width, aperture surface and mounting tab locations. Furthermore, an option of wire or PCB leads allows electrical interface flexibility.
The device body is an opaque plastic which minimizes sensitivity to both visible and near-infrared external light sources which may impact operation. Aperture width choices provide different optical resolution for motion sensing. A covered aperture provides dust protection, while an open aperture provides maximum protection against external light sources.
Electrical operation is over a wide supply voltage range. LED emissions are near-infrared (850—940nm).
Detector digital output logic choices of buffer or inverter with totem-pole or open-collector driver circuit simplify interface for various electrical requirements.
Custom electrical, wire and cabling services are available.
Contact your local representative or OPTEK for more information. Compliant to EU RoHS Directive 2002/95/EC
Features:
Choice of logic and output driver circuits
Choice of aperture size, covered or open
Wire or PCB leads
Choice of mounting features
Direct TTL, LSTTL, CMOS Interface
對射式光電開關(光電子)OPB960、OPB970、OPB980、OPB990系列
OPB960/970/980/990系列非接觸式Photologic®開槽光開關為設計工程師提供了滿足特定應用要求的靈活性。
從帶有0.125"(3.18mm)寬插槽的標準外殼構建,用戶可以指輸出邏輯狀態、輸出驅動電路、光圈寬度、光圈表面和安裝凸耳位置。此外,電線或PCB引線選項允許電氣接口靈活性。
裝置主體為不透明塑料,可較大程度降低對可能影響操作的可見光和近紅外外部光源的靈敏度。光圈寬度選擇為運動傳感提供了不同的光學分辨率。有蓋的光圈可提供防塵保護,而開放的光圈可提供較大程度的外部光源保護。
電氣操作在較寬的電源電壓范圍內。LED發射為近紅外(850-940nm)。
探測器數字輸出邏輯選擇帶圖騰極或開路集電極驅動電路的緩沖器或逆變器,簡化了各種電氣要求的接口。
提供定制的電氣、電線和布線服務。
有關更多信息,請聯系當?shù)卮砘騉PTEK。符合歐盟RoHS指令2002/95/EC
對射式光電開關(光電子)特征:
邏輯和輸出驅動電路的選擇
孔徑大小的選擇,有蓋或開放
導線或PCB引線
安裝特性的選擇
直接TTL、LSTL、CMOS接口