Olympus NDT 奧林巴斯 Nortec 2000D渦流探傷儀

The Nortec 2000D+ offers a frequency range of 50 Hz to 12 MHz for applications ranging from detection of cracks in tubes or structures to the discovery of minute flaws in aircraft materials. Single or dual frequency operation, easy to use digital conductivity, and rotating scanner support make the flaw detector ideal for numerous aerospace NDT applications.

Customer-interchangeable displays offer excellent visibility in any lighting condition. A VGA output drives a heads up display for inspection where conditions may be cramped or a large desktop monitor or projector for classroom training.

At less than 4 lbs (1.8 Kg), the rugged Foreign Object Debris (FOD) free case will survive harsh field and production environments. An adjustable tilt bail and anti-slip bumper allow the unit to be placed on just about any surface.

The Nortec 2000D+ incorporates our unique PowerLink™ software, which provides automatic probe recognition and documentation. The instrument can be set-up by recalling the program stored in the PowerLink™ chip, providing integrity and repeatability of inspection results.

As many as 120 programs can be stored and recalled later. Date and time are recorded with each set-up and are easily identified with alphanumeric values up to 29 characters long. 20 memory locations are available to store eddy current displays..

Features

• 50 Hz - 12 MHz frequency range 
• Single Li-Ion battery 
• Lightweight, less than 4lbs. (1.8 Kg) 
• Digital conductivity in International Annealed Copper Standard (%IACS) or Mega Siemens per meter (MS/m) 
• Non-conductive coating readings in inches or millimeters 
• Multiple scanner support 
• Internal balance loads for single coil probe support 
• Customer interchangeable displays: 
- Hi-Brite Electroluminescent 
- Monochrome Liquid Crystal 
- Color Liquid Crystal 
• Dual Frequency 
• VGA Output 
• Display Freeze to hold flaw signals 
• PowerLinkTM Technology - automatic probe recognition and instrument set-up 
• Split screen presentation with color coded soft keys 
• On screen reference memory for go/no go applications 
• On board storage of 120 programs 
• Waterfall display 
• Windows-based EddyMaster™ Software

Nortec 2000D+ Specifications*

Hazardous Area Operation: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1

Power 
Power Requirements: 85 to 240 volts, 50-60 Hz. External holder charges batteries outside the instrument. Charging time is typically 4 hours. 
Low Battery Protection: Display bar graph "gas gauge" indicates approximate operating time. 
Battery Operating Time: 8 hours (nominal depending on configuration)

Conductivity 
Frequency: 60 kHz or 480 kHz 
Probe Type: NORTEC Conductivity Probe 
Digital Conductivity Specification: Digital conductivity display from 0.9% to 110% IACS or 0.5 to 64 MS/m. Accuracy within +/- 0.5% IACS from 0.9% to 65% IACS and within +/- 1.0% of values over 62%. Meets or exceeds BAC 5651 specifications. 
Non-Conductive Coating Thickness: Can measure non-conductive coating thickness from 0" to 0.015" (0 to 0.38 mm). Accuracy of +/- 0.001" (0.025 mm) over 0.00 to 0.015" (0 to 0.38 mm) range

Scanners 
Scanner Compatibility: Will operate all Olympus Nortec and other commercially available scanners 
Waterfall Display: Stores up to 60 sweeps per hole and includes an on screen readout of the distance to the defect from the start of the scan (PS-5 only)

Dual frequency 
Frequency Extension: 50 Hz to 12 MHz 
Second Frequency: 50 Hz to 3 MHz, 2nd frequency is an exact division of the first frequency in ratios of: 1/2 (F1 < 6 MHz), 1/4, and even divisors to 1/32. 
Display: Frequency 1 (F1) only, Frequency 2 (F2) only, sum of F1 and F2, difference between F1 and F2, split screen with selected combinations of F1 and F2 and mixed frequencies 
High Pass Filter: Available in Frequency 1 (F1) only

Standard Inclusions 
Operating Manual 
Power Cord 
Li-Ion Battery 
Universal Barrery Charger 
Carry Case 
Protective Soft Cover 
VGA Cable 
Calibration Certificate

*All specifications are subject to change without notice.