HYDRAULICS & INDUSTRIAL PRODUCTS // DIRECTIONAL VALVES - SOLENOID OPERATED DIRECTIONAL VALVES DG4VC-3-0C-M-PS2-H-7-54 ( DG4VC-3-0C-M-PS2-H-7-56 )
.jpg)
DG4VC-3-0C-M-PS2-H-7-54東京計(jì)器TOKYO-KEIKI電磁閥
MODEL CODE| (F3) | - | DG4VC | - | 3 | - | 0 | A | (L) | - | M | - | P | S2 | - | H | - | 7 | - | (P08) | - | 54 | | 1 | | 2 | | 3 | | 4 | 5 | 6 | | | | 7 | 8 | | 9 | | 10 | | 11 | | 12 |
|
| 1. | Fluid | | | Omit | for mineral oil, water glycol | | | F3: | phosphate ester | | 2. | Fine current signal wet armature directional valve | | 3. | Interface | | | 3: | ISO 4401-03 | | 4. | Spool type | | 5. | Spring set | | | A: | spring offset A type (2 position, single sol.) | | | B: | spring offset B type (2 position, single sol.) | | | C: | spring centered (3 position, dual sol.) | | | N: | no spring detent | | 6. | Solenoid assembly direction | | | Omit | for st'd (energized, P to B, A to T) | | | L: | left hand assembly (energized, P to A, B to T) | | 7. | Wiring connection | | | P: | plug-in conduit box G1/2 (PF1/2) | | 8. | Elec. accessory | | | S1: | with internal power semiconductor switch | | | S2: | with internal power semiconductor switch
(and reverse connection protection diode) | | | N2: | with internal power semiconductor switch
(and reverse connection protection diode)
positive logic input type | | 9. | Solenoid coil voltage | | | H: | DC24 V | | 10. | T port allowable back pressure | | | 7: | 20.6 MPa | | 11. | Port orifice | | | Omit | for no port orifice (st'd) | | 12. | Design no. |
|
DG4VC-3-0C-M-PS2-H-7-54東京計(jì)器TOKYO-KEIKI電磁閥 SPECIFICATIONS | Model | Interface | Max. working Press.
(MPa) | Max. Flow
(L/min) | Pressure Drop | Max. Tank Line Press.
(MPa) | Max. Response Freq.
(times/min) | Mass
(kg) | | single sol. | double sol. | | DG4VC-3 | ISO 4401-03 | 35.0 | 80 | consult mfr. | 20.6 | 300 | 1.7 | 2.1 |
|
Filtration Req.
(?m) | Ambient Temp. Rge.
(?C) | Fluid Temp. Rge.
(?C) | Fluid Viscosity
(mm2/s) | | 25.0 MPa | 35.0 MPa | Mineral Oil | Water Cont | Recom.Rge. | Extreme Rge. | | 25 | 25
absolute | -20 to +70 | -20 to +60 | +10 to +54 | 13 to 54 | 13 to 400 |
|
SOLENOID SPECIFICATIONS| Power | Volt.
Code | Volt.
(V) | Holding
Current
(A) | Power
Consump.
(W) | Allow.
Volt. Fluct.
(%) | Insul.
Class | | DC | H | 24 | 1.16 | 28 | ?10 | F type
(155) |
|
化工儀器網(wǎng)
