欧美……一区二区三区,欧美日韩亚洲另类视频,亚洲国产欧美日韩中字,日本一区二区三区dvd视频在线

深圳市鑫博恒業科技有限公司

示溫貼紙,英國測溫試紙,omega插頭,k型感溫線

化工儀器網收藏該商鋪

18

聯系電話

13823144468

您所在位置:
深圳市鑫博恒業科技有限公司>>美國omega壓力傳感器>> DPG1000ADA-100G-2N壓力表 美國omega
 QQ交談
產品展示

DPG1000ADA-100G-2N壓力表 美國omega

  • 公司名稱:
  • 更新時間:
  • 所 在 地:
  • 生產地址:
  • 瀏覽次數:
  • 深圳市鑫博恒業科技有限公司
  • 2024-04-06 13:25:47
  • 深圳市
  • 美國omega
  • 2072

我要詢價

【簡單介紹】

品牌 OMEGA/美國
DPG1000ADA-100G-2N壓力表 美國omega, 一手貨源,優勢批發,精度高,是優質的壓力傳感器

【詳細說明】


DPG1000ADA-100G-2N壓力表 美國omega

報警裝置和模擬輸出功能的數字壓力計
DPG1000ADA_DPG1000DAR系列
DPG1000ADA_DPG1000DAR 系列:報警裝置和模擬輸出功能的數字壓力計
DPG1000ADA-15G-1N
AD or DC Powered with Dual Alarms
DC Powered with Dual Alarms and Analog Output
Ranges between 15 psi and 3000 psi
Normal or Reverse Acting Alarms
Hi/Lo, Hi/Hi, or Lo/Lo Alarms available
Colored LED Alarm Status Indicators
Using the DPG1000ADA and DPG1000DAR Alarm Outputs Normal (Fail-safe) vs. Reverse Action—The convention for alarm action is that with the normal or fail-safe configuration, the alarm output relays will be CLOSED (relay energized) for a clear or non-alarm condition and OPEN (relay not energized) for an alarm condition. This is primarily for users who require an alarm condition if the gauge loses power or suffers a catastrophic failure. In the wiring diagrams, the normally closed and normally open designations refer to standard relay terminology (i.e., the relay contact status with the relay coil not energized). Therefore, with the normal (fail-safe) configuration in a green or non-alarm condition, the relay will be energized so that continuity can be expected between the common and normally open leads. In a red or alarm condition, the relay will be open (not energized) so that continuity can be expected between the common and normally closed leads.
Contact Rating and Protection The contacts of the alarm relays are rated at 1 A/24 Vdc or 0.5 A/ 115 Vac. Switching loads greater than the rating, or switching large inductive loads, will shorten the useful life of the contacts. In lowlevel switching or with dry contacts, the user should consider whether external contact protection, such as snubber networks or arc suppression networks, is required to protect the contacts. In addition, no internal fusing is included in the DPG1000 contact circuits. The circuit external to the gauge alarm outputs should be fused by the user in applications in which good design dictates this practice.
Using the DPG1000DAR Analog Output The analog output is easy to use if a few system considerations are observed. The DPG1000DAR is DC powered, with the gauge power supply (–) tied to the 4 to 20 mA (–). Therefore, the DC supply (–) lead should be considered common with regard to the analog output (–) or ground connection in the user’s system. Be sure to observe the output compliance (voltage drive) capabilities of the gauge. The compliance, and therefore the maximum loop resistance the output can drive, is a function of the supply voltage to the gauge. Consult the manual for maximum loop resistance vs. supply voltage. Too large a loop resistance will cause the gauge output to “l(fā)imit" or saturate before reaching its full 20 mA output.
DPG1000ADA AC/DC Powered with Dual Alarms
SPECIFICATIONS
Accuracy: ±0.25% FSO or better, ±1 least-significant digit (includes linearity, hysteresis, repeatability)
Controls and Location: Display zero/span, non-interactive, ±15% range; setpoint 1 and setpoint 2, 0 to 100% range; top-accessible, multiturn potentiometers
Alarm Deadbands (Hysteresis): 1% of FSO, standard
Alarm Outputs: Dual form “C" (SPDT) relay contacts; individual setpoint 1 and setpoint 2 settings via top-accessible multiturn potentiometers; high/low alarm configuration standard, others available; relay contacts rated 1 A/24 Vdc, 0.5 A/115 Vac, non-inductive
Alarm Indicators: Bicolor (red/green) LEDs on front panel
Test Function: Front-panel TEST button, when depressed, toggles both SP1 and SP2 alarm status, independent of pressure input, to allow testing of system operation
Alarm Response Time: 100 ms typical
Power: Any AC source of 8 to 24 Vac, 50/60 Hz, or any DC source of 9 to 32 Vdc, 1.0 W maximum; optional wall-mount power supply available to operate on 115 Vac (DPG1000-PS)
DPG1000DAR DC Powered with Dual Alarms and 4 to 20 mA Output
SPECIFICATIONS
Accuracy: ±0.25% FSO or better, ±1 least-significant digit (includes linearity, hysteresis, repeatability)
Controls and Location: Display zero/span, non-interactive, ±15% range; setpoint 1 and setpoint 2, 0 to 100% range; test calibration level, 0 to 100% range; top-accessible, multiturn potentiometers analog output zero/span; internal potentiometers
Alarm Deadbands (Hysteresis): 1% of FSO, standard
Alarm Outputs: Dual form “C" (SPDT) relay contacts; individual setpoint 1 and setpoint 2 settings via top-accessible multiturn potentiometers; high/low alarm configuration standard; relay contacts rated 1 A/24 Vdc, 0.5 A/115 Vac, non-inductive
Alarm Indicators: Bi-color (red/green) LEDs on front panel
Alarm Response Time: 100 ms typical
Analog Output: 4 to 20 mA DC; output drive (compliance) determined by power source
Analog Output Response Time: 50 ms, typical
Test Function: Front-panel TEST button, when depressed, toggles both SP1 and SP2 alarm status and simultaneously sets display and analog output to “calibration" level, independent of pressure input, to allow testing system operation
Power: Any DC source of 9 to 32 Vdc, 1.0 W max
Electrical Connection: 0.9 m (3') long, 4-conductor 22 AWG shielded cable for power and retransmitted output; 0.9 m (3') long, 6-conductor 22 AWG cable for alarm contacts
ALARMS (final siffix 1N standard)
1 = HI/LO (standard)
2= HI/HI
3= LO/LO
N = Normal Acting (standard)
R = Reverse Acting
Example: DPG1000ANA-15G-3R HAS LO/LO ALARMS, Reverse Acting

 DPG1000ADA-100G-2N壓力表 美國omega 

相關產品:

DPG1000B-2KG壓力表 美國omega

    
留言框
感興趣的產品: *
留言內容:
您的姓名: *
您的單位:
聯系電話: *
微信:
常用郵箱:
詳細地址:
省份: *
驗證碼: * =   請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
      

相關產品

產品搜索

請輸入產品關鍵字:

聯系方式
地址:深圳市福田區華強北路華強廣場A棟17A(華強北地鐵站-A口)
郵編:518031
聯系人:趙先華
電話:0755-82768776,82736276
傳真:0755-83041664
手機:13823144468
留言:發送留言
個性化:www.xbtes.com
網址:www.xb5j.com
商鋪:http://www.hbwxwy.cn/st98310/
| 商鋪首頁 | 公司檔案 | 產品展示 | 供應信息 | 公司動態 | 詢價留言 | 聯系我們 | 會員管理 |
化工儀器網 設計制作,未經允許翻錄必究.Copyright(C) http://www.hbwxwy.cn, All rights reserved.
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。
二維碼 在線交流

掃一掃訪問手機站
极品人妻av在线播放-久久精品视频一区二区三区| 人妻丝袜中文字幕在线视频-亚洲成av人片一区二区三区| 俄罗斯胖老太太黄色特级片-国产精品黑丝美腿美臀| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 亚洲国产欧美日韩不卡-熟妇激情一区二区三区| 国产成人精品免费视频大全办公室-亚洲欧美日本综合在线| 97人妻精品一区二区三区爱与-日韩精品亚洲专区在线观看| 国产精品成人欧美激情-黄色床上完整版高清无遮挡| 一区二区三区国产高清mm-美女张开腿让帅哥桶爽| av一区免费在线观看-中文字幕日韩国产精品视频| 亚洲黄片三级三级三级-国产成人一区二区在线视频| 精品一区二区三区av在线-欧美黑人巨大精品一区二区| 亚洲国产中文欧美一区二区三区-国产精品一区二区视频成人| 国产人妻人伦精品日本-国产98超碰人人做人人爱| 97一区二区三区在线-欧美护士性极品hd4k| 深夜三级福利在线播放-日韩精品一区二区在线天天狠天| 国产成人高清精品免费5388-好妞色妞在线视频播放| 婷婷六月视频在线观看-久久亚洲综合国产精品| 国内精产熟女自线一二三区-六月丁香婷婷在线观看| 看肥婆女人黄色儿逼视频-秋霞电影一区二区三区四区| 亚洲最新国产无人区123-黄片一区二区在线观看| 男人的天堂久久精品激情-最新亚洲精品a国产播放| 五月婷婷免费观看视频-男人操女人下面视频在线免费看| 男人的天堂久久精品激情-最新亚洲精品a国产播放| 男女做爰猛烈啪啪吃奶在线观看-人妻连裤丝袜中文字幕| 熟妇勾子乱一区二区三区-欧美爱爱视频一区二区| 国产免费高清av在线播放-成年人在线播放中文字幕| 久久网站中文字幕精品-三级精品久久中文字幕| 十九禁止观看无码视频-亚洲国产激情福利专区| 亚洲欧美激情自拍色图-国产亚洲精品sese在线播放| 亚洲黄片三级三级三级-国产成人一区二区在线视频| 国产精品久久99精品毛片-国产四季高清一区二区三区| 四虎成人在线免费视频-亚洲熟女中文字幕天堂| 国产日韩电影一区二区三区-美女露双奶头无遮挡物| 成人免费黄色在线网站-日韩精品一区二区三区四区在线| 中文字幕日本在线资源-国产+成+人+亚洲欧洲自线| 国产成人精品免费视频大全办公室-亚洲欧美日本综合在线| 亚洲一区二区三在线观看-国产精品亚洲а∨天堂123| 亚洲精品蜜桃在线观看-国产欧美日韩在线观看精品观看| 亚洲国产日韩精品四区-dy888午夜福利精品国产97| 青青草原免费国产在线视频-精品人妻乱码一区二区三区四区|