Supply Voltage

10 to 30V dc (10% maximum ripple) at less than 18 mA, exclusive of load

Range

Opposed Mode (Visible Red):10 m
Opposed Mode (Infrared):15 m
Polarized Retro:4 m
Retro:6 m
Diffuse- Long Range (Visible Red):800 mm
Diffuse- Long Range (Infrared):1500 mm
Diffuse- Short Range:250 mm

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Output Configuration

100 mA with short circuit protection OFF-state leakage current:

NPN:< 10 μA sinking

PNP:< 200 μA sourcing

ON-state saturation voltage:

NPN:< 1.6V @ 100 mA

PNP:< 3.0V @ 100 mA

Output Response Time

Opposed Mode:1 millisecond ON/600 microseconds OFF
All others:800 microseconds ON/OFF
NOTE:100 millisecond delay on power-up; outputs do not conduct during this time

Repeatability

Opposed Mode:140 microseconds
All Others:155 microseconds

Adjustments

Diffuse, Retroreflective, and Polarized Retroreflective models (only):Single-turn Sensitivity (Gain) adjustment potentiometer

Indicators

Two LED Indicators: Power (green) and Signal (yellow) Green ON steady:Power ON
Yellow ON steady:Light sensed
Green flashing:Output overloaded
Yellow flashing:Marginal excess gain (1 to 1.5X)

Construction

Housing:ABS
Lenses:PMMA
Gain Adjuster:PBT

Connections

2 m (6.5') or 9 m (30') 4-wire PVC cable, 150 mm (6

Operating Conditions

Temperature:–20° to +60° C (–4° to +140° F)
Relative Humidity:95% @ 50° C (non-condensing)

Environmental Rating

IEC IP67 (NEMA 6) and 1200 PSI washdown NEMA ICS 5, Annex F-2002

Vibration and Mechanical Shock

All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06

Certifications

Approvals pending